8615921639636



—— Product Center ——

Quality builds brands, technology strengthens capabilities,

global development is achieved together.



Location: HOME > PRODUCTS > Stainless Steel > Stainless Steel Coil > 430 Ferritic Stainless Steel Sheet

430 Ferritic Stainless Steel Sheet

430 is a ferritic stainless steel, commonly known as stainless iron. It contains approximately 17% chromium and no nickel, and its cost is lower than 304. It has good corrosion resistance, fast thermal conductivity, low thermal expansion, and strong magnetism. Its formability and weldability are average. It is often used for structural parts that do not require deep drawing, offering high cost-effectiveness. It is frequently used in applications with moderate corrosion resistance requirements and where cost control is a priority.



Contact Us

Product Name	Stainless steel Coil
Thickness (T)	0.3mm – 6.0mm (cold-rolled)
Thickness (T)	3.0mm – 14mm (hot-rolled)
Width (W)	1000mm, 1219mm(4ft), 1250mm, 1500mm
Inner Diameter	508mm (20in), 610mm (24in)
Gross Weight (GW)	2-5 tons (regular)
Gross Weight (GW)	5-8 tons (rewind)
Net Weight (NW)	Slightly less than gross weight (excluding paper sleeves/packaging)
Standard	ASTM, AISI, JIS, GB, DIN, EN, etc.
Surface	BA, 2B, NO.1, 4K,, 8K, Brushed Finish / HL Finish,Matte Finishetc.
Delivery status	Cold Rolled, Soft / Annealed,Hot Rolled, Pickled & Oiled,Supplied in Coils,Cut-to-length Sheets,Water-proof Packing,Wooden Pallet / Skid
Scope of Application	Widely used in high temperature and electrical industry, medical equipment construction, chemical, food industry, agriculture and ship parts, food and beverage packaging,Kitchen supplies, trains, airplanes, conveyor belts, vehicles, bolts, nuts, springs and screens, etc.
Production Technology	Hot Rolling, Cold Rolling
Delivery time	7-15 days

430(1Cr17)/SUS430

Characteristics: As a representative of ferritic steel, it has low thermal expansion rate, excellent formability and oxidation resistance.

Application: Mainly used in heat resistant appliances, burners, household appliances, 2 types of tableware, kitchen sink, external decorative materials, bolts, nuts, CD rod, screen and so on.

Chemical element	C	Si	Mn	P	S	Cr
Content (% )	≤0.12	≤1.00	≤1.00	≤0.04	≤0.03	16.00~18.00

Mechanical Properties (Room Temperature)

Tensile Strength: ≥450 MPa

Yield Strength: ≥205 MPa

Elongation: ≥22%

Hardness: HB ≤ 183

Features: Good plasticity, moderate strength, excellent high-temperature oxidation resistance

Dimensions (Commonly Used in Export)

Cold-rolled sheet: Thickness 0.3mm – 6.0mm	Hot-rolled medium-thick plate: Thickness 3.0mm – 50mm
Current Inventory Width: 1000 / 1219 / 1250 / 1500 mm	Current Inventory Length: 2000 / 2438 / 3000 / 6000 mm
Custom length cutting, slitting, and shearing available upon request.

Core Performance

Significant Cost Advantage:Nickel-free, priced significantly lower than 304/316 stainless steel, offering exceptional value.

Good Atmospheric Corrosion Resistance & Oxidation Resistance:Suitable for dry indoor environments, normal atmospheric conditions, and high-temperature stove parts.

Excellent Thermal Conductivity:Low coefficient of thermal expansion, suitable for kitchenware, baking trays, and appliance panels.

Strong Magnetism:Can be used for magnetic accessories, kitchen appliances, and sensor components.

Processing Performance:Bendability and stamping are acceptable, but deep drawing is average; weldability is average, prone to cracking.

Typical Applications

Appliance Housings: Refrigerator panels, dishwashers, microwave ovens, ovens

Kitchenware: Cookware, baking trays, tableware, sink accessories

Architectural Decoration: Interior panels, railings, elevator cladding

Automotive Parts: Exhaust systems, mufflers, decorative parts

Hardware & Sanitary Ware: General bathroom accessories, lamp housings

Mechanical & Electrical Equipment: Housings, brackets, non-pressure-bearing structural components

Surface finish: 2B Industrial Standard (most commonly used), BA Bright Annealed Finish, No.1 Hot Rolled Pickled Finish, No.4 Brushed/Matte Finish, HL Hairline Finish, 8K Mirror Finish

Payment Methods

Flexible payment terms available: T/T and L/C. For new clients, 30% advance payment for production, balance against copy of B/L. L/C is acceptable for large & regular orders to secure both parties.

Previous:316/316L Stainless Steel Rod

Next:430 Ferritic Stainless Steel Rod

Warehousing Management

Before each batch of steel leaves the factory, a complete process inspection is strictly carried out. From chemical composition, mechanical properties to dimensional tolerance and surface quality, each item is carefully checked to ensure compliance with national standards and export regulations. At the same time, the quantity, packaging and rust prevention treatment are also verified. An original factory warranty certificate is attached, guaranteeing the quality. Before shipment, inspection photos are provided. Any non-compliant items will not be released, and the quality is fully controllable throughout the process. This ensures your overseas purchasing is safe and worry-free.

All items are visually inspected before delivery. No cracks, deformation, rust, scratches or cutting marks are allowed; edges must be smooth. Only visually sound products will be shipped.

Thickness, width, length, wall thickness, outer diameter have been measured. Straightness, curvature, torsion, diagonal tolerance all meet the corresponding tolerance requirements.

Quality inspection includes: mechanical property tests (yield strength, tensile strength), elongation rate, impact energy, hardness testing, chemical composition testing, process performance testing, etc.

Inspection according to packaging requirements: secure binding, moisture-proof film, rust-proof paper, export fumigation/fumigation-free wooden crates, shipping marks, gross weight, net weight, etc.

We will provide full reception services to support the customers' on-site inspection of the goods.

Hot Rolling Production Line

Cold rolling precision processing

Cold drawing/cold rolling line

Hot Rolling Production Line

Hot rolling production line (producing hot-rolled coils/medium-thick plates, thickness 2–60mm)

Cold rolling precision processing

(Producing ultra-thin / high-precision / shiny panels, with thickness ranging from 0.1 to 3mm, for high-end products)
Cold drawing/cold rolling line

(High-precision cold-drawn round steel, square steel, hexagonal steel, and special-shaped bars)

Cold drawing/cold rolling line

(High-precision cold-drawn round steel, square steel, hexagonal steel, and special-shaped bars)

Warehousing Management

A ten-thousand-ton standardized warehouse with grid-based zoning and system positioning enables rapid material retrieval and reduces the time spent searching for materials.

Inbound inspection: Verify the physical items against the inbound form, inspect the appearance, dimensions, and labels. Once confirmed to be correct, the materials are entered into the ERP system and processed for storage.

Logistics and Global Delivery: Self-operated fleet + contracted logistics partners; expedited service available for urgent orders.

International Shipping: Supports FOB, CIF, DDP, and other trade terms, covering 100+ countries and regions.

Process: Booking → Trucking → Customs Declaration → Loading onto Ship/Aircraft → Bill of Lading Issuance → Document Delivery → Destination Port Customs Clearance (Optional) → Last-Mile Delivery.

Provides door-to-door one-stop logistics with full tracking to ensure safe and timely arrival of goods.

After-Sales Service and Traceability: Delivery receipts, logistics information, and quality inspection documents are sent to customers within 24 hours of shipment.

Established a full product lifecycle traceability system, allowing tracking of production, quality inspection, warehousing, and transportation records.

Follow-up inspection within 72 hours of arrival; rapid response and handling of quality issues; assistance in resolving customs clearance issues for foreign trade orders.

Packaging Method