—— Product Center ——

Quality builds brands, technology strengthens capabilities,

global development is achieved together.



Location: HOME > PRODUCTS > Aluminum / Aluminum Alloy > Aluminum/Aluminum Alloy Plate > 1060 / EN AW-1060 Aluminum Plate

1060 / EN AW-1060 Aluminum Plate

EN AW-1060 (Al99.6) is a European standard grade; its domestic equivalent is 1060, a 1000-series industrial pure aluminum with an aluminum content of ≥99.6%. It is also commonly referred to in international trade as "Commercially Pure Aluminum" sheet.



Contact Us

Product Name：	Aluminum Plate
Diameter：	100–2600 mm; Standard (in stock): 1000 mm, 1219 mm, 1500 mm
Thickness：	0.2mm – 50mm (thin plate: 0.2–6mm [best-selling]; thick plate: > 6mm)
Length：	1000mm-8000mm or Can be cut to specified lengths.
Standard：	ASTM, AISI,EN,DIN,BS,JIS,GOST,GB,etc
Main Material：	1000 series, 2000 series, 3000 series, 5000 series, 6000 series, 7000 series, 8000 series
Surface：	mill finish, flat, smooth, stucco emboss(orange peel), corrugation
Processing Method：	Bending, Welding, Decoiling, Cutting, Punching.
Special Specifications：	Available according to customer’s requirements and quantity.
Packaging：	Standard seaworthy packaging or as customers’ requirements.
Delivery Time：	Within 10-20 working days after receipt the deposit payment.
Usage：	Construction filed, Ships building industry, Decoration,Industry,
Usage：	Manufacture,Machinery and hardware fields, etc

Chemical composition

Element	Si	Fe	Cu	Mn	Mg	Zn	Ti	Al
Percentage (%)	≤0.25	≤0.35	≤0.05	≤0.03	≤0.03	≤0.05	≤0.03	≥99.60

Core features

1. Excellent plasticity, easy bending, deep drawing, and welding performance; no heat treatment strengthening, only cold processing can increase hardness

2. Excellent resistance to atmospheric corrosion, good electrical and thermal conductivity; low tensile strength, not suitable for load-bearing structural components

3. Suitable for anodizing and spraying on the surface, it is a mainstream material for architectural decoration, signs, insulation skins, and conductive components

Common supply status (Temper)	O: Annealed soft state, with the highest elongation rate, suitable for deep drawing and bending
	H14 / H24: Semi-hard, most commonly used in exports, balancing strength and bending
	H16: 3/4 hard
	H18: Fully hard, with the highest strength, prone to cracking during bending

Surface Finish

Mill finish (hot rolled / cold rolled original surface, default): No polishing, a small amount of rolling texture

Other selectable surfaces: Glossy finish, brushed finish, anodized finish, coated (protective film to prevent scratches during transportation)

Advantages of 1060 Aluminum Sheet

1. Excellent plasticity and ease of processing: It offers outstanding performance in bending, stamping, hem-rolling, and welding; the sheet is resistant to cracking during processing, making it suitable for various sheet metal forming applications.

2. Superior anodizing results: High purity ensures a uniform oxide layer and minimal color variation; it supports both natural and colored anodizing, providing a high-quality decorative finish.

3. Corrosion resistance: A natural oxide film forms on the pure aluminum surface, offering strong resistance to atmospheric corrosion; ideal for outdoor architectural applications and thermal insulation cladding.

4. Excellent electrical and thermal conductivity: Suitable for busbars, heat sinks, and heat exchanger linings.

5. Pure and stable material composition: Low impurity levels, a smooth surface finish, and minimal rolling defects.

6. Cost-effective: Lower procurement costs compared to 5000-series and 6000-series aluminum alloys, with abundant market availability.

7. Recyclable and eco-friendly: Meets the requirements for overseas green projects.

Payment Methods

Flexible payment terms available: T/T and L/C. For new clients, 30% advance payment for production, balance against copy of B/L. L/C is acceptable for large & regular orders to secure both parties.

Previous:6061 / EN AW-6061 (AlMg1SiCu) Alloy Plate

Next:316/316L Stainless Steel Coil

Warehousing Management

Before each batch of steel leaves the factory, a complete process inspection is strictly carried out. From chemical composition, mechanical properties to dimensional tolerance and surface quality, each item is carefully checked to ensure compliance with national standards and export regulations. At the same time, the quantity, packaging and rust prevention treatment are also verified. An original factory warranty certificate is attached, guaranteeing the quality. Before shipment, inspection photos are provided. Any non-compliant items will not be released, and the quality is fully controllable throughout the process. This ensures your overseas purchasing is safe and worry-free.

All items are visually inspected before delivery. No cracks, deformation, rust, scratches or cutting marks are allowed; edges must be smooth. Only visually sound products will be shipped.

Thickness, width, length, wall thickness, outer diameter have been measured. Straightness, curvature, torsion, diagonal tolerance all meet the corresponding tolerance requirements.

Quality inspection includes: mechanical property tests (yield strength, tensile strength), elongation rate, impact energy, hardness testing, chemical composition testing, process performance testing, etc.

Inspection according to packaging requirements: secure binding, moisture-proof film, rust-proof paper, export fumigation/fumigation-free wooden crates, shipping marks, gross weight, net weight, etc.

We will provide full reception services to support the customers' on-site inspection of the goods.

Hot Rolling Production Line

Cold rolling precision processing

Cold drawing/cold rolling line

Hot Rolling Production Line

Hot rolling production line (producing hot-rolled coils/medium-thick plates, thickness 2–60mm)

Cold rolling precision processing

(Producing ultra-thin / high-precision / shiny panels, with thickness ranging from 0.1 to 3mm, for high-end products)
Cold drawing/cold rolling line

(High-precision cold-drawn round steel, square steel, hexagonal steel, and special-shaped bars)

Cold drawing/cold rolling line

(High-precision cold-drawn round steel, square steel, hexagonal steel, and special-shaped bars)

Warehousing Management

A ten-thousand-ton standardized warehouse with grid-based zoning and system positioning enables rapid material retrieval and reduces the time spent searching for materials.

Inbound inspection: Verify the physical items against the inbound form, inspect the appearance, dimensions, and labels. Once confirmed to be correct, the materials are entered into the ERP system and processed for storage.

Logistics and Global Delivery: Self-operated fleet + contracted logistics partners; expedited service available for urgent orders.

International Shipping: Supports FOB, CIF, DDP, and other trade terms, covering 100+ countries and regions.

Process: Booking → Trucking → Customs Declaration → Loading onto Ship/Aircraft → Bill of Lading Issuance → Document Delivery → Destination Port Customs Clearance (Optional) → Last-Mile Delivery.

Provides door-to-door one-stop logistics with full tracking to ensure safe and timely arrival of goods.

After-Sales Service and Traceability: Delivery receipts, logistics information, and quality inspection documents are sent to customers within 24 hours of shipment.

Established a full product lifecycle traceability system, allowing tracking of production, quality inspection, warehousing, and transportation records.

Follow-up inspection within 72 hours of arrival; rapid response and handling of quality issues; assistance in resolving customs clearance issues for foreign trade orders.

Packaging Method